배우고픈 공돌이
2. WIFI 사용 본문
ssh 프롬프트에서 connmanctl 명령어를 사용. 아래와 같이 설정한다.
debian@beaglebone:/storage/eMMC$ sudo connmanctl
Error getting VPN connections: The name net.connman.vpn was not provided by any connmanctl> enable wifi
Error wifi: Already enabled
connmanctl> scan wifi
Scan completed for wifi
connmanctl> services
iptime wifi_506583e91ce7_697074696d65_managed_none
selpman wifi_506583e91ce7_73656c706d616e_managed_psk
connmanctl> agent on
Agent registered
connmanctl> connect wifi_506583e91ce7_73656c706d616e_managed_psk
Agent RequestInput wifi_506583e91ce7_73656c706d616e_managed_psk
Passphrase = [ Type=psk, Requirement=mandatory, Alternates=[ WPS ] ]
WPS = [ Type=wpspin, Requirement=alternate ]
Passphrase? selpman123
Connected wifi_506583e91ce7_73656c706d616e_managed_psk
connmanctl> quit
debian@beaglebone:/storage/eMMC$ iwconfig
usb0 no wireless extensions.
usb1 no wireless extensions.
SoftAp0 IEEE 802.11 Mode:Master Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
wlan0 IEEE 802.11 ESSID:"selpman"
Mode:Managed Frequency:2.432 GHz Access Point: 00:08:9F:12:CB:93
Bit Rate=18 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=34/70 Signal level=-76 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless extensions.
can0 no wireless extensions.
can1 no wireless extensions.
debian@beaglebone:/storage/eMMC$ ifconfig
SoftAp0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.8.1 netmask 255.255.255.0 broadcast 192.168.8.255
inet6 fe80::5265:83ff:fee9:1cea prefixlen 64 scopeid 0x20<link>
ether 50:65:83:e9:1c:ea txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 33 bytes 6430 (6.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 3041 bytes 208236 (203.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3041 bytes 208236 (203.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.7.2 netmask 255.255.255.252 broadcast 192.168.7.3
inet6 fe80::5265:83ff:fee9:1ce9 prefixlen 64 scopeid 0x20<link>
ether 50:65:83:e9:1c:e9 txqueuelen 1000 (Ethernet)
RX packets 2167 bytes 170246 (166.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1057 bytes 206134 (201.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
usb1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.6.2 netmask 255.255.255.252 broadcast 192.168.6.3
ether 50:65:83:e9:1c:ec txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
inet 192.168.0.8 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::5265:83ff:fee9:1ce7 prefixlen 64 scopeid 0x20<link>
ether 50:65:83:e9:1c:e7 txqueuelen 1000 (Ethernet)
RX packets 28 bytes 3918 (3.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 55 bytes 11987 (11.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
'ARM > BBBW' 카테고리의 다른 글
java FX 개발 환경 구축 (0) | 2017.11.28 |
---|---|
JAVA 개발 환경 구축 (0) | 2017.11.13 |
3. 모니터 사용하기 (0) | 2017.10.16 |
1-1. eMMC로 부팅하기. (0) | 2017.10.14 |
1. 커널 이미지 올리기 + fdisk로 파일시스템 확장하기 (1) | 2017.10.14 |